صفحه شخصی دکتر علیرضا ستوده

مقالات چاپ شده در نشریات

1. Degenerated Element Stiffness Matrix in Large Deformation Analysis ‪(in Persian)‬, Chamran University Engineering Journal, Vol.‎ 1, pp.‎ 50-63 (1999)‎.‎

2. G.‎ Karami and A.R.‎ Setoodeh, Development of a Degenerated Element Tangent Stiffness Matrix in Large Deformation Analysis, Asian J.‎ of Civil Engineering, Vol.‎ 1, No.‎ 3, pp.‎ 71-91 (2000)‎.‎

3. A.R.‎ Setoodeh and G.‎ Karami, Geometrical Nonlinear Analysis of Iso and Orthotropic Elastic Problems, J.‎ of Iranian Society of Mechanical Engineers, Vol.‎ 4, (1998)‎.‎

4. A.R.‎ Setoodeh and G.‎ Karami, A Solution for the Vibration and Buckling of Composite Laminates with Elastically Restrained Edges, Composite Structures, Vol.‎ 60, pp.‎ 245-253 (2003)‎.‎

5. A.R.‎ Setoodeh and G.‎ Karami, Static, free vibration and buckling analysis of anisotropic thick laminated composite plates on distributed and point elastic supports using a 3-D layer-wise FEM, Engineering Structures, Vol.‎ 26, pp.‎ 211-220 (2004)‎.‎

6. A.R.‎ Setoodeh, F.R.‎ Bighlari, H.‎ Hadavinia and K.‎ M.‎ Nikbin.‎ Comparison of Analytical, Numerical and Experimental Methods in Deriving Fracture Toughness Properties of Adhesives Using Bonded Double Lap Joint Specimens, Int.‎ J.‎ of Adhesives and Adhesions, Vol.‎ 81, pp.‎ 529-553 (2005)‎.‎

7. P.‎ Malekzadeh and A.R.‎ Setoodeh. Large deformation analysis of moderately thick laminated plates on nonlinear elastic foundations by DQM, Composite Structures, Vol.‎ 80, pp.‎ 569–579 (2007)‎.‎

8. P.‎ Malekzadeh, H.‎ Rahideh and A.R.‎ Setoodeh. Optimization of non-symmetric convective–radiative annular fins by differential quadrature method, Energy Conversion and Management, Vol.‎ 48, pp.‎ 1671–1677 (2007)‎.‎

9. P.‎ Malekzadeh and A.R.‎ Setoodeh.‎ E.‎ Barmshouri.‎ A hybrid layerwise and differential quadrature method for in-plane free vibration of laminated thick circular arches, J.‎ of Sound and vibration, Vol.‎ 315, pp.‎ 212-225, (2008)‎.‎

10. A.R.‎ Setoodeh and H.‎ Attariani.‎ Nanoscale simulations of Bauschinger effects on a nickel nanowire, Material Letters, Vol.‎ 62, pp.‎ 4266-4268, (2008)‎.‎

11. A.R.‎ Setoodeh, H.‎ Attariani and M.‎ Khosrownejad.‎ Nickel nanowires under uniaxial loads: A molecular dynamics simulation study, Computational Materials Science, Vol.‎ 44, pp.‎ 378-384, (2008)‎.‎

12. P.‎ Malekzadeh, A.R.‎ setoodeh. DQM in-plane free vibration of laminated moderately thick circular deep arches, Advances in Engineering Software, Vol.‎ 40, pp.‎ 798-803, (2009)‎.‎

13. A.R.‎ Setoodeh, P.‎ Malekzadeh and K.‎ Nikbin.‎ Low velocity impact analysis of laminated composite plates using a 3D elasticity based layerwise FEM, Materials & Design, Vol.‎ 30, pp.‎ 3795-3801, (2009)‎.‎

14. A.R.‎ Setoodeh, M.‎ Jahanshahi and H.‎ Attariani.‎ Atomistic simulations of the buckling behavior of perfect and defective silicon carbide nanotubes, Computational Materials Science, Vol.‎ 47, pp.‎ 388-397, (2009)‎.‎

15. P.‎ Malekzadeh, A.R.‎ Setoodeh, A.‎ Alibeygi Beni.‎ Small scale effect on the free vibration of orthotropic arbitrary straight-sided quadrilateral nanoplates, Composite Structures, Vol.‎ 93, pp.‎ 1631-1639, (2011)‎.‎

16. P.‎ Malekzadeh, A.R.‎ Setoodeh, A.‎ Alibeygi Beni.‎ Small scale effect on the thermal buckling of orthotropic arbitrary straight-sided quadrilateral nanoplates embedded in an elastic medium, Composite Structures, Vol.‎ 93, pp.‎ 2083-2089, (2011)‎.‎

17. A.R.‎ Setoodeh, M.‎ Khosrownejad and P.‎ Malekzadeh.‎ Exact nonlocal solution for postbuckling of single-walled carbon nanotubes, Physica E, Vol.‎ 43, pp.‎ 1730-1737, (2011)‎.‎

18. A.R.‎ Setoodeh, M.‎ Tahani and E.‎ Selahi.‎ Hybrid Layerwise-Differential Quadrature Transient Dynamic Analysis of Functionally Graded Axisymmetric Cylindrical Shells Subjected to Dynamic Pressure, Composite Structures, Vol.‎ 93, pp.‎ 2663-2670, (2011)‎.‎

19. A.R.‎ Setoodeh, H.‎ Attariani, M.‎ Jahanshahi.‎ Mechanical Properties of Silicon-Germanium Nanotubes under Tensile and Compressive Loadings, Journal of Nano Research, Vol.‎ 15, pp.‎ 105-114, (2011)‎.‎

20. A.R.‎ Setoodeh, P Malekzadeh, A.R.‎ Vosoughi.‎ Nonlinear free vibration of orthotropic graphene sheets using nonlocal Mindlin plate theory, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol.‎ 29, pp.‎ 170-179, (2011)‎.‎

21. R.‎ Setoodeh, M.‎ Ghorbanzadeh, P Malekzadeh.‎ A two-dimensional free vibration analysis of functionally graded sandwich beams under thermal environment, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol.‎ 226, pp.‎ 2860-2873, (2012)‎.‎

22. A.‎ R.‎ Setoodeh, M.‎ Tahani, and E.‎ Selahi.‎ Transient Dynamic and Free Vibration Analysis of Functionally Graded Truncated Conical Shells with Non-Uniform Thickness Subjected to Mechanical Shock Loading, Composites Part B,, Vol.‎ 43, No.‎ 5, pp.‎ 2161-2171, (2012)‎.‎

23. A.R.‎ Setoodeh, A.‎ Azizi, Bending and Free Vibration Analyses of Rectangular Laminated Composite Plates Resting on Elastic Foundation Using a Refined Shear Deformation Theory, Iranian Journal of Materials Forming, Vol.‎ 2, 1-13, (2013)‎.‎

24. M.‎ Tahani, A.‎ R.‎ Setoodeh, and E.‎ Selahi.‎ Three-Dimensional Transient Analysis of Functionally Graded Cylindrical Shells subjected to Asymmetric Dynamic Pressure, Science and Engineering of Composite Materials, Vol.‎ 20, No.‎ 1, pp.‎ 75-85, (2013)‎.‎

25. E.‎ Selahi, A.R.‎ Setoodeh, M.‎ Tahani, Three-dimensional transient analysis of functionally graded truncated conical shells with variable thickness subjected to an asymmetric dynamic pressure, International Journal of Pressure Vessels and Piping, Vol.‎ 119, 29-38, (2014)‎.‎

26. A.R.‎ Setoodeh, S.‎ Afrahim, Nonlinear dynamic analysis of FG micro-pipes conveying fluid based on strain gradient theory, Composite Structures, Vol.‎ 116, 128–135, (2014)‎.‎

27. H.‎ Eslami, F.‎ Mehdipour, A.‎ R.‎ Setoodeh, J.‎ Rouzegar, Nanoconfined polymers: modelling and simulation approaches, Molecular Simulation, Vol.‎ 22, 1-15, (2014)‎.‎

28. A.R.‎ Setoodeh, M.‎ Derahaki, N.‎ Bavi, DQ thermal buckling analysis of embedded curved carbon nanotubes based on nonlocal elasticity theory, Latin American Journal of Solids and Structures, Vol.‎ 12, 1901-1917, (2015)‎.‎

29. AR Tavakolpour-Saleh, A.R.‎ Setoodeh, M.‎ Gholamzadeh, A Novel Multi-Component Strain-Gauge External Balance for Wind Tunnel Tests: Simulation and Experiment, Sensors and Actuators, A: Physical, Vol.‎ 247, 172-186, (2016)‎.‎

30. A.R.‎ Setoodeh, M.‎ Rezaei, M.R.‎ Zendehdel-Shahri, Linear and nonlinear torsional free vibration of functionally graded micro/nano-tubes based on modified couple stress theory, Applied Mathematics and Mechanics ‪(English Edition)‬, Vol.‎ 37, 725-740, (2016)‎.‎

31. A.R.‎ Setoodeh, M.‎ Shojaee, Application of TW-DQ method to nonlinear free vibration analysis of FG carbon nanotube-reinforced composite quadrilateral plates, Thin-Walled Structures, Vol.‎ 108, 1-11, (2016)‎.‎

32. H.‎ Farahmand, A.R.‎ Setoodeh, A density functional approach to characterize anisotropic hyperelastic behavior of organic crystals: Case study of nylon-6, 6, Computational Materials Science, Vol.‎ 124, 390-397, (2016)‎.‎

33. H.‎ Badjian, A.R.‎ Setoodeh, Improved tensile and buckling behavior of defected carbon nanotubes utilizing boron nitride coating–a molecular dynamic study.‎ Physica B: Condensed Matter, Vol.‎ 507, 156-163, (2017)‎.‎

34. A.R.‎ Setoodeh, H.‎ Badjian, H.‎ Shirzadi Jahromi, Atomistic study of mono/multi-atomic vacancy defects on the mechanical characterization of boron-doped graphene sheets.‎ Journal of molecular modeling, Vol.‎ 23, DOI: 10.‎1007/s00894-016-3176-9 (2017)‎.‎

35. A.R.‎ Setoodeh, M.‎ Rezaei, Large amplitude free vibration analysis of functionally graded nano/micro beams on nonlinear elastic foundation, Structural Engineering and Mechanics, Vol.‎ 61, 2, (2017)‎.‎

مقالات ارائه شده در کنفرانس ها

1. بررسی رفتار مکانیکی یک نانو سیم فلزی نیکل با استفاده از روش چند مقیاسه شبه پیوستار

2. بررسی رفتار کششی کریستال بدون نقص مس در مقیاس نانو با استفاده از روش دینامیک مولکولی

3. مطالعه پارامتری پاسخ دینامیکی پوسته های استوانه ای مرکب لایه ای در برابر ضربه با سرعت کم

4. مینیمم سازی وزن سازه های دو بعدی با استفاده از روش بهینه سازی تکاملی سازه ها (ESO) بر مبنای قید تنش

5. تحلیل عددی صفحه ساخته شده از مواد هدفمند به کمک القاء بار حرارتی مجازی

   1. Analysis of the bauschinger effect on springback characteristics in sheet metal L-bending process

6. بررسی اثر فرایند شرینک فیت (Shrink fit) بر عملکرد مخازن تحت فشار و تعیین شعاع های بهینه سیلندر های چند لایه به کمک حل تحلیلی

7. مدل‌سازی چند مقیاسی فرو رفتگی در صفحه و مقایسه پاسخ با مدل پیوستار

   1. Computer Simulation of Buckling Behavior of SiC Nanotubes via Molecular Dynamics Theory
   2. Studying the Effects of Wall-Thickness and Diameter on the Mechanical Properties of SWNTS
   3. Investigation the Impact Response of Fiber Reinforced Composites with a Hole
   4. Identifying Fracture parameters of polymer composites
   5. Investigation of Size effects on the Tensile Behavior of SIC
   6. Effect of structural damping on dynamic response of laminated cylindrical shell subjected to low velocity impact

8. حل دو بعدی ارتعاشات آزاد تیر ساندویچی هدفمند به کمک تئوری لایه ای و روش دیفرانسیل کوادریچر

9. شبیه سازی دینامیک ملکولی کشش و فشار در بلور بدون عیب آرگون

   1. Studying mechanical properties of single-walled carbon nanotubes under radial pressure with an energy equivalent model

10. بررسی نحوه توزیع تنش بین نانولوله و ماتریس در نانو کامپوزیت ها

    1. Atomistic simulation of tension compression asymmetry in nickel nanocrystals
    2. Finite element modeling of single-walled carbon nanotube
    3. Coupled Layerwise-DQ method for bending and Vibration Analysis of Piezoelectric Laminated Composite Circular Arches
    4. Buckling analysis of nanobeams based on nonlocal continuum Timoshenko beam theory using differential quadrature method

11. کاربرد روش پیوسته غیرمحلی درتحلیل ارتعاشی نانولوله ها بوسیله روش دیفرانسیل کوادریچر

    1. Analysis of large amplitude free vibrations of single-walled carbon nanotubes: an analytical approach

12. بررسی ارتعاشات آزاد غیرخطی میکرو تیر با لحاظ اثرات دما در یک محیط الاستیک

13. تحلیل ارتعاشی نانوتیرهای خمیده به روش الاستیسیته غیرمحلی با استفاده از حل عددی دیفرانسیل کوادریچر

14. ارتعاش آزادغیرخطی تیرهدفمند تقویت شده با نانولوله های کربنی با استفاده از روش VIM

15. ارتعاش آزادغیرخطی تیرهدفمند تقویت شده با نانولوله های کربنی با استفاده از روش VIM

    1. Effect of Diameter on the Tensile Behavior of Silicon-Base Nanotubes, a Molecular Dynamics Study
    2. Torsional Vibration of Defective Single-Walled Carbon Nanotubes Using Molecular Dynamics

16. تعیین منحنی تنش-کرنش کامپوزیتهای الیاف کنف ساخته شده به وسیله سه نوع پلیمر گرماسخت و روش تزریق در خلاء

17. مقایسه خواص کششی و خمشی کامپوزیتهای ونیل استر/الیاف شیشه ساخته شده به روشهای قالب باز و بسته

18. بررسی تجربی تاثیر بافت¬های مختلف الیاف شیشه در جذب انرژی مواد مرکب ساخته شده به روش تزریق در خلاء

19. بررسی تجربی خواص مکانیکی بیوکامپوزیت تک جهته کنف/اپوکسی

20. بررسی تاثیر بافت¬های مختلف الیاف شیشه بر خواص مکانیکی کامپوزیت¬های ساخته شده به روش تزریق در خلاء

پایان نامه ها

چاپ کتاب