صفحه شخصی دکتر امیر امیدوار

1. innovative renewable and sustainable energy technologies
2. carbon neutrality and low carbon energy systems
3. net-zero energy buildings
4. clean energy HVAC technologies
5. sustainable and energy-efficient architecture
6. smart buildings
7. thermal comfort and human-building interaction
8. building energy simulation

مقالات چاپ شده در نشریات

1. M. Aminzadeh, J. Khadem, A.R. Zolfaghari, A. Omidvar, Flow regime prediction of a self-oscillatory flow induced by a vertical jet in a heated cavity: computational and analytical approach, International Journal of Thermal Sciences, 2024, https://doi.org/10.1016/j.ijthermalsci.2024.109216
2. H. Kouravand, A. Omidvar, A. Brambilla, Evaluation of the buoyancy-induced natural ventilation performance of polyvinyl chloride (PVC) tube-type solar chimneys: Numerical and experimental approach, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2024, https://doi.org/10.1007/s40997-024-00782-x
3. S. M. Jaafarian, S. A. Zolfaghari, A. Omidvar, J. Khadem, M. Aminzadeh, Study of oscillatory flow structure and characterization of merging process in self-excited twin jets: Numerical and analytical approach, International Journal of Communications in Heat and Mass Transfer, 2024, https://doi.org/10.1016/j.icheatmasstransfer.2024.107643
4. S. M. Jaafarian, S. A. Zolfaghari, A. Omidvar, J. Khadem, M. Aminzadeh, Comparative evaluation of oscillatory behavior and cooling performance of twin and single self-excited jets in a confined heated enclosure, Applied Thermal Engineering, 2024, https://doi.org/10.1016/j.applthermaleng.2023.121567

5. A. Omidvar, J. Kim, A novel physics-based model for predicting the individuals’ thermal sensations based on air temperature and biomarkers measured by wearable devices, Building and Environment, 2023, https://doi.org/10.1016/j.buildenv.2023.110050

6. Z. Tabaie, A. Omidvar, Human body heat-driven thermoelectric generators as a sustainable power supply for wearable electronic devices: Recent advances, challenges, and future perspectives, Heliyon, 2023, https://doi.org/10.1016/j.heliyon.2023.e14707
7. F. Ghanbari, A. Omidvar, Numerical study of the heat transfer rate from the isothermal circular cylinder in the presence and absence of the separating plate under the flow, Journal of Selected Topics in Energy, Vol. 4, No. 1, 2023, pp. 44-55, https://doi.org/10.61186/jste.4.1.44

8. Z. Tabaie, A. Omidvar, J. Kim, Non-uniform distribution of clothing insulation as a behavioral adaptation strategy and its effect on predicted thermal sensation in hot and humid environments, Energy and Buildings, 2022, https://doi.org/10.1016/j.enbuild.2022.112310

9. A. Omidvar, J. Kim, Thermoregulatory and cardiovascular responses to up-step change transient thermal environments: A risk factor in individuals with prosthetic heart valves, Building and Environment, 2022, https://doi.org/10.1016/j.buildenv.2022.108852
10. M. Aminzadeh, J. Khadem, A.R. Zolfaghari, A. Omidvar, Numerical investigation on oscillation behavior of a non-isothermal self-excited jet in a cavity: The effects of Reynolds number and temperature differences, International Journal of Engineering: Transactions C, 2022, https://doi.org/10.5829/IJE.2022.35.06C.11
11. A. Omidvar, H. Shayani, A. Rezaei, Modeling the effect of solar radiation on the performance of direct evaporative coolers and evaluating the effectiveness of common sunshades, Tabriz Mechanical Engineering Journal, Vol. 5, No.4, 2022, https://www.magiran.com/paper/2357891/modeling-the-effect-of-solar-radiation-on-the-performance-of-direct-evaporative-coolers-and-evaluating-the-effectiveness-of-common-sunshades?lang=en

12. M. Aminzadeh, J. Khadem, A. Zolfaghari, A. Omidvar, Computational study on self-oscillatory flow induced by vertical and horizontal jets in partially heated and cooled cavities, International Communications in Heat and Mass Transfer, 2021, https://doi.org/10.1016/j.icheatmasstransfer.2021.105680

13. A. Omidvar, A. Brambilla, A novel theoretical method for predicting the effects of lighting colour temperature on physiological responses and indoor thermal perception, Building and Environment, 2021, https://doi.org/10.1016/j.buildenv.2021.108062
14. A.R. Tavakolpour-Saleh, A. Hamzavi, A. Omidvar, A novel solar-powered self-blowing air heating system with active control based on a quasi-Stirling cycle, Energy, 2021, https://doi.org/10.1016/j.energy.2021.120454
15. F. Khalvati, A. Omidvar, F. Hadianfard, Study on summer thermal performance of a solar ventilated window integrated with thermoelectric air-cooling system, International Journal of Energy and Environmental Engineering, 2021, https://doi.org/10.1007/s40095-020-00376-8
16. N. Nemati, A. Omidvar, B. Rosti, Performance evaluation of a novel hybrid cooling system combining indirect evaporative cooler and earth-air heat exchanger, Energy, 2021, https://doi.org/10.1016/j.energy.2020.119216
17. M. Malakoutikhah, H. Rabiei, A. Zare, A. Omidvar, The simultaneous effect of ambient temperature and light intensity on performance: A cross-sectional study, International Archives of Health Sciences, 2021, https://doi.org/10.4103/IAHS.IAHS_125_20

18. M. Aminzadeh, J. Khadem, S. A. Zolfaghari, A. Omidvar, Numerical study of nozzle width effect on cooling performance of a turbulent impinging oscillating jet in a heated cavity, International Communication in Heat and Mass Transfer, 2020, https://doi.org/10.1016/j.icheatmasstransfer.2020.104899

19. A. Omidvar, A. Mahdavi, R. Mehryar, A simulated study on the effect of water temperature on cooling efficiency of water mist fire extinguishers, Journal of Thermal Engineering, 2020, https://doi.org/10.18186/thermal.764153
20. Z. Kheirandish, M. Kharati-koopaee, A. Omidvar, Numerical study into the fin performance subjected to different periodic base temperatures employing Fourier and non-Fourier heat conduction models, International Communications in Heat and Mass Transfer, 2020, https://doi.org/10.1016/j.icheatmasstransfer.2020.104562
21. A. Omidvar, J. Kim, Modification of sweat evaporative heat loss in the PMV/PPD model to improve thermal comfort prediction in warm climates, Building and Environment, 2020, https://doi.org/10.1016/j.buildenv.2020.106868
22. B. Rosti, A. Omidvar, N. Monghasemi, Optimal insulation thickness of common classic and modern exterior walls in different climate zones of Iran, Journal of Building Engineering, 2020, https://doi.org/10.1016/j.jobe.2019.100954
23. A. Omidvar, An energy balance approach to predict the critical Weber number of droplet breakup under combined turbulent and aerodynamic stresses, Applied Energy Conversion, Vol. 1, 2020, 3838.1000, https://doi.org/10.22077/AEC.2020.3838.1000

24. B. Rosti, A. Omidvar, N. Monghasemi, Optimum position and distribution of insulation layers for exterior walls of a building conditioned by earth-air heat exchanger, Applied Thermal Engineering, 2019, https://doi.org/10.1016/j.applthermaleng.2019.114362

25. A. Omidvar, Development and assessment of an improved secondary atomization model considering the effects of both turbulent and drag induced interfacial stresses, Applied Thermal Engineering, 2019, https://doi.org/10.1016/j.applthermaleng.2019.04.090
26. F. Khalvati, A. Omidvar, Prediction of Noise Transmission Loss and Acoustic Comfort Assessment of a Ventilated Window using Statistical Energy Analysis, International Journal of Engineering, 2019, https://doi.org/10.5829/IJE.2019.32.03C.14
27. F. Khalvati, A. Omidvar, Summer Study on thermal performance of an exhausting airflow window in evaporatively-cooled buildings, Applied Thermal Engineering, 2019, https://doi.org/10.1016/j.applthermaleng.2019.02.135
28. A. Omidvar, Experimental investigation on the effect of diesel-biodiesel blends on waste heat recovery capability of a small power generator, Fuel and Combustion, Vol. 11, No. 4, 2019, https://www.jfnc.ir/article_85316_en.html
29. F. Hadianfard. A. Omidvar, M. Naserian, Study on the effect of heat sinks layout and air flow pattern through the fins on thermal performance of thermoelectric air-handling units, Modares Mechanical Engineering, Vol. 18, No. 4, pp. 265-276, 2018, http://mme.modares.ac.ir/article-15-16076-en.html

30. S. Zare, A.R. Tavakolpour Saleh, A. Omidvar, From Beale number to pole placement design of a free piston Stirling engine, Archive of Mechanical Engineering, 2017, https://doi.org/10.1515/meceng-2017-0029

31. A. R. Tavakolpour Saleh, Sh. Zare, A. Omidvar, Applying perturbation technique to analysis of a free piston Stirling engine possessing nonlinear springs, Applied Energy, 2016, https://doi.org/10.1016/j.apenergy.2016.09.009

32. A. Omidvar, H. Taghvaei, H. Taghvaei, Study on energy consumption and thermal comfort performance of geothermal powered underfloor heating systems, Journal of Multidisciplinary Engineering Science and Technology, 2016, https://www.jmest.org/wp-content/uploads/JMESTN42351653.pdf
33. A. Omidvar, Calculation of required heat transfer coefficient for building envelope, in order to achieve optimal thermal performance in floor heating systems, Modares Mechanical Engineering, Proceedings of the Second International Conference on Air-Conditioning, Heating and Cooling Installations, Vol. 16, No. 13, pp. 69-72, 2016, http://mme.modares.ac.ir/article-15-1096-en.html
34. M. Kharati Koopaee, A. Omidvar, I. Jelodari, Numerical Study on Steady State Heat Transfer Rate of Nano-Fluid Filled within Square Cavity in the Presence of Oriented Magnetic Field, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2014, https://doi.org/10.1177/0954406213507
35. A. Omidvar, B. Afra, Evaluation of Thermal and Moisture Inertia Effects in Clothing and Gagge’s Model Modification for Body Thermal Sensation and Physiological Responses Estimation, Modares Mechanical Engineering, Vol. 14, No. 3, pp. 167-175, 2014 2014, http://mme.modares.ac.ir/article-15-4222-en.html

36. H. Motamedi Zoka, A. Omidvar, H. Khaleghi, On the Performance of Various Reynolds Stress Models in Resolving Non-equilibrium Features of Turbulent In-cylinder Engine Flows, Arabian Journal for Science and Engineering, Vol. 38, Issue 8, pp. 2891-2900, 2013, https://doi.org/10.1007/s13369-012-0477-x

37. A. Omidvar, B. Rosti, Effect of Moisture Content of Building Materials on Thermal Performance of Exterior Building Walls, Modares Mechanical Engineering, Vol. 13, No. 10, pp. 152-156, 2013, http://mme.modares.ac.ir/article-15-10058-en.html
38. A. Omidvar, R. Mehryar, A. H. Mahdavi, Evaluation of Unity Lewis Number Assumption in Modeling of Water and Fuel Droplets Evaporation, Fuel and Combustion, No. 1, pp. 63-73, 2013, https://www.jfnc.ir/article_46173.html?lang=en
39. M. Kharati Koopaee, A. Omidvar, I. Jelodari, Evaluation of Temperature-Independent Thermo-physical Properties Assumption of Water Based Alumina Nano-Fluid in Natural Convection within the Enclosures, Modares Mechanical Engineering, Vol. 13, No. 8, pp. 68-78, 2013, http://mme.modares.ac.ir/article-15-10638-en.html
40. M. Jahanmiri, A. Omidvar, M. Kharati Koopaee, A Comparative Study of Turbulence Models Performance in Predicting the Frequency of Naturally Excited Oscillating Jet Flows, Modares Mechanical Engineering, Vol. 13, No. 2, pp. 1-11, 2013, http://mme.modares.ac.ir/article-15-9751-en.html

41. M. Kharati Koopaee, A. Omidvar, A New Spectral-Finite Volume Approach in Non-Fourier Heat Conduction Problems with Periodic Surface Disturbances, Journal of Heat Transfer, Vol. 134, No. 6, 2012, pp. 1-7, 2012, https://doi.org/10.1115/1.4006036

42. M. Maerefat, A. R. Zolfaghari, A. Omidvar, On the Conformity of Floor Heating Systems with Sleeping in Eastern-Style Beds; Physiological Responses and Thermal Comfort Assessment, Building and Environment, Vol. 47, pp. 322-329, 2012, https://doi.org/10.1016/j.buildenv.2011.07.008
43. A. Omidvar, H. Khaleghi, An Analytical Approach for Calculation of Critical Weber Number of Droplet Breakup in Turbulent Gaseous Flow, Arabian Journal for Science and Engineering, Vol. 37, Issue 8, pp. 2311-2321, 2012, https://doi.org/10.1007/s13369-012-0319-x
44. H. Motamedi Zoka, A. Omidvar, H. Khaleghi, A Comparative Assessment of a Compressible Reynolds Stress Model and Some Variant k-e Models for Engine Flow Applications, Arabian Journal for Science and Engineering, Vol. 37, Issue 6, pp. 1737-1749, 2012, https://doi.org/10.1007/s13369-012-0270-x
45. A. Omidvar, H. Khaleghi and E. Amini, Modeling of the Effects of Turbulence Intensity on Mechanical Hemolysis of Red Blood Cells, Journal of Isfahan Medical School, Vol. 29, No. 174, pp. 1-7, 2012, https://jims.mui.ac.ir/article_13735.html?lang=en
46. A. R. Zolfaghari, M. Maerefat, A. Omidvar, On the performance of radiant floor heating systems; considering eastern lifestyles, Sharif Journal of Mechanical Engineering, Vol. 3, No. 1, 2011, https://sjme.journals.sharif.edu/article_6185.html?lang=en
47. A. R. Zolfaghari, M. Maerefat, A. Omidvar, Thermal response modeling of human body under the influence of eating cold or hot food, Iranian Journal of Biomedical Engineering, Vol. 4, No. 1, pp. 2-10, 2010, https://sid.ir/paper/571027/en
48. A. Omidvar, E. Amini, Predicting of Physical Properties and Atomization Characteristics of the Biofuel Derived from Chlamydomonas Microalgae, Fuel and Combustion, Vol. 3, No. 2, pp. 47-59, 2010, https://www.sid.ir/paper/138467/en
49. Q. Dorosti, M. Maerefat, A. Omidvar, Performance Improvement of Ceiling Radiant Cooling System by Suitable Design of Panel Height, Modares Mechanical Engineering, Vol. 10, No. 3, pp. 45-56, 2010, http://mme.modares.ac.ir/article-15-5789-en.html
50. A. Omidvar, H. Khaleghi, A Dynamic Analysis of fuel Droplets Breakup and Modification of Taylor Analogy Breakup (TAB) with Respect to Density Ratio Effects, Fuel and Combustion, No. 2, pp. 1-10, 2009, https://www.magiran.com/paper/767015/a-dynamic-analysis-of-fuel-droplets-breakup-and-modification-of-taylor-analogy-breakup-tab-with-respect-to-density-ratio-effects?lang=en

51. H. Khaleghi, D. D. Ganji, A. Omidvar, Comparison of Various Droplet Breakup Models in Gas-Liquid Flows in High Pressure Environments, Iranian Journal of Science and Technology, Vol. 32, No. B4, 2008, pp. 385-400, https://www.magiran.com/paper/541360/comparison-of-various-droplet-breakup-models-in-gas-liquid-flows-in-high-pressure-environments?lang=e

مقالات ارائه شده در کنفرانس ها

1. S. M. Jaafarian, S. A. Zolfaghari, A. Omidvar, J. Khadem, M. Aminzadeh, The effect of heat flux and inlet flow velocity on the frequency and thermal performance of twin self-excited jets, The 32nd annual international conference of the Iranian Mechanical Engineers Association, 2024, Iran.
2. S. M. Jaafarian, S. A. Zolfaghari, A. Omidvar, J. Khadem, M. Aminzadeh, Numerical investigation of nozzle-to-target spacing effect on oscillatory behavior in twin self-excited impinging jets, The 32nd annual international conference of the Iranian Mechanical Engineers Association, 2024, Iran.

3. M. Sharifi, A. Omidvar, Study of the effect of the air change rate on the performance of thermal insulation of the building envelope in Iran's climate conditions, 4th National Conference on Air Conditioning and Heating and Refrigeration Facilities, 2023, Iran.

4. K. Shabanizad, A. Omidvar, Sensitivity evaluation of evaporative behavior of biofuel droplets to their thermophysical properties, 9th Fuel and Combustion Conference, 2022, Iran.

5. H. Kouravand, A. Omidvar, Performance comparison of zero, one, and two-equation turbulence models in the simulation of free convection in a vertical cylinder subjected to constant heat flux, 6th national conference on mechanical and aerospace engineering, 2021, Iran.

6. M. Aminzadeh, J. Khadem, A. Zolfaghari, A. Omidvar, Numerical comparative study between flow field characteristics of a double-inlet and single inlet self-excited jet, 28’th international conference on Mechanical Engineering, 2020, Iran.

7. M. Aminzadeh, J. Khadem, A. Zolfaghari, A. Omidvar, Influence of non-isothermal conditions on oscillation characteristics of self-excited jet in a rectangular cavity, 18th Fluid dynamics Conference, 2019, Tehran.

8. A. Omidvar, Evaluation of the Kolev’s theoretical argument in droplet breakup under both turbulent and aerodynamic induced stresses, 7th Iranian Conference of Fuel and Combustion, 2018, Iran.

9. A. Omidvar, An analytical method for approximating the turbulence intensity and local thermal discomfort due to draught in personalized ventilating systems, 3rd National Conference on Air Conditioning and Heating and Cooling Installations, 2018, Iran.

10. F. Hadianfard, A. Omidvar, A Comparative analysis on two widely used theoretical models for direct evaporative coolers, 9th Conference of Heat Exchangers, 2017, Tehran, Iran.

11. M. Moallemi, A. Omidvar, Evaluation of the effect of using aerodynamic drag coefficient on model performance, 25’th International Conference on Mechanical Engineering, 2017, Tehran, Iran.

12. A. Omidvar, K. Shabanizad, Substitution of Fuel Vapor Properties with Air; A Simple and Effective Method in Modeling of Droplet Vaporization of Biodiesel and Diesel Fuel, 5’th Conference of Fuel and Combustion, 2014, Tehran, Iran.

13. A. Omidvar, B. Afra, Modeling of the Mental Stresses on Building Energy Consumption in Hot and Humid Climatic Conditions, 3rd Annual Conference of Clean Energy, 2013, Kerman, Iran.

14. M. Saeidi, A. Omidvar, Study of Position and Direction of High Intensity Radiant Heating Systems on Thermal Comfort and Energy Consumption, 3rd Annual Conference of Clean Energy, 2013, Kerman, Iran.

15. B. Rosti, A. Omidvar, H. Dolat Abadi, On the Study of the Effect of Orientation on Thermal Performance of Exterior Building Walls in Different Seasonal and Climatic Conditions, 21st International Conference of Mechanical Engineering, 2012, Tehran, Iran.

16. B. Rosti, A. Omidvar, On the Performance of the Thermal Insulation in Exterior Walls of Buildings with Different HVAC Systems, International Conference on Mechanical Engineering and Advanced Technology, 2012, Isfahan, Iran.
17. A. H. Mahdavi, A. Omidvar, R. Mehryar, Effects of Nozzle Type and Injection Pattern on Evaporative Cooling Performance of Water Mist Fire Suppression Systems, 20th International Conference of Mechanical Engineering, 2012, Shiraz, Iran.
18. M. Abbaspour, A. Omidvar, Frostbiting Prevention in Agricultural Plants Using Infrared Radiant Heaters; A Novel Application, 20th International Conference of Mechanical Engineering, 2012, Shiraz, Iran.
19. A. Moghanlou, A. Omidvar, R. Mehryar, Study of Local Thermal Discomfort of Floor Heating Systems in Various Climatic Conditions in Iran, 20th International Conference of Mechanical Engineering, 2012, Shiraz, Iran.
20. M. Essmaeili, A. H. Nikseresht, A. Omidvar, Effect on the number of Imaginary Particles on Boundaries on the Solution of Heat Conduction Problems by SPH Method, 20th International Conference of Mechanical Engineering, 2012, Shiraz, Iran.

21. A. Omidvar, A New Approach for Estimating of Sauter Mean Diameter of Biofuel Sprays Based on Mixture Topological Index, 4’th Conference of Fuel and Combustion, 2011, Kashan, Iran.

22. A. Omidvar, E. Amini, Analytical Study on the Turbulent Shear-Induced Hemolysis and Platelet Activation Downstream of the Mechanical Heart Valves, 18th Conference of Biomedical Engineering, 2011, Tehran, Iran. (Indexed In IEEE)

23. A. Tayebi, H. Khaleghi, A. Omidvar, Effect of Turbulence Modulation on Turbulent Multiphase Liquid-Gas Flow, 18th International Conference of Mechanical Engineering, 2010, Tehran, Iran.

پایان نامه ها

      PhD Dissertations:

1. Numerical analysis on oscillating characteristics of self-excited twin planar jets, Mohammad Jafarian, In Progress, Supervisor-50%
2. Evaluation and numerical modelling of the effect of dynamic airflow pattern on thermal sensation and thermophysiological responses of the human body, Hossein Shojaee, In Progress, Supervisor-100%
3. Investigation of non-Fourier heat transfer using spectral-finite volume method in mediums subjected to periodic boundary conditions, Zahra Kheirandish, In Progress, Supervisor-50%
4. Independent simulation on thermal and acoustic performance of ventilated solar- screen glazing system, Farid Khalvati, 2019, Supervisor-100%

       MSc Theses:

1. Experimental study of the effect biodiesel blends on the exhaust waste heat recovery in micro-CHPs, Shaghayegh Hossini, In Progress, Supervisor-100%
2. Numerical study on the effect of azimuthally non-uniform boundary heat flux on turbulent convective heat transfer in the absorber tube of parabolic trough solar collector, Hamzeh Jamali, 2023, Supervisor-100%
3. Study of the effects of skin temperature and body thermoregulatory responses on the performance of wearable thermoelectric generators, Zahrasadat Tabaie, 2023, Supervisor-100%
4. Numerical study of the effect of roadside buildings’ morphology on pollution ventilation in street canyons with different aspect ratios, Mohammad Kordavani, 2023, Supervisor-50%
5. Numerical modeling of melting in a rectangular enclosure by predicting the Nusselt number at the melt front, Mojtaba Masoomi Sarvestani, 2023, Advisor
6. Numerical modeling and evaluation of summer-time thermal performance of open-joint solar ventilated windows, Sajad Hashemi, 2022, Supervisor-100%
7. Calculating the optimal thickness of thermal insulation for exterior walls of naturally ventilated buildings in different climate zones of Iran, Mohammadreza Sharifi, 2021, Supervisor-100%
8. Numerical study of buoyancy-induced flow in an open vertical cylinder subjected to asymmetric lateral heating, Hossein Kouravand, 2021, Supervisor-100%
9. Thermal evaluation of free convection around a staggered tube array, Ali Niakan, 2021, Advisor
10. A novel solar combined heat and power system based on Stirling cycle along with active control, Ahmad Hamzavi, 2020, Supervisor-50%
11. Experimental study on performance characteristics of rooftop vents as a solar auxiliary ventilation system, Alireza Eydi, 2020, Supervisor-50%
12. Numerical investigation of heat transfer enhancement in triple tube heat exchangers using helical baffles, Mohammad Ali Zarghami, 2020, Advisor
13. Numerical investigation of the effect of shape, dimensions, and position of the vent on backdraft phenomenon, Siavash Mousavi, 2020, Advisor
14. Experimental study on the effect of pumping and water supply system on water conservation in conventional evaporative coolers, Abbas Rezaei, 2019, Supervisor-100%
15. Study of non-Fourier effects on prediction of airbag-induced thermal skin burn injuries, Zohreh Mohammadizadeh, 2018, Supervisor-100%
16. Improvement of thermal performance of floor radiant heating-cooling systems by using thermal insulation strips and metal sheets, Mohammadreza Hashemi, 2018, Supervisor-100%
17. Feasibility study on the performance of direct evaporative coolers to supply cold water needed for child ceiling systems, Akbar Falamarzi Monfared, 2018, Supervisor-100%
18. Analysis of PCM enhanced solar chimney system for various climate regions, Nima Monghasemi, 2018, Supervisor-50%
19. Effect of air pre-cooling by solar powered thermoelectric modules on the performance of evaporative coolers, Farhad Hadianfard, 2018, Supervisor-100%
20. Thermal analysis of living tissues near the cancer cells and its effect on the skin temperature distribution, Himan Salmanpour, 2018, Advisor
21. Study on thermal and visual comfort conditions in a prototype solar blind building, Mohammad Naserian, 2017, Supervisor-50%
22. Numerical modelling and parametric studies of active magnetic regenerator refrigeration system for proposing design considerations, Aref Effatpisheh, 2017, Advisor
23. A parametric study of thermocapillary convection on confined fluid between two parallel surfaces, Ayaz Mohammadi, 2017, Advisor
24. Numerical investigation of thermal capacity of layered soil in ground source projects, Seyed Javad Hashemi Nejad, 2017, Advisor
25. Performance analysis of hybrid system of earth-air heat exchanger and dew-point indirect evaporative cooler, Nasibeh Nemati, 2016, Supervisor-100%
26. Study on the effect of solar shade canopy on the performance of evaporative coolers, Hamed Shayani, 2016, Supervisor-100%
27. Study of the effect of ceiling fan on air flow pattern inside the residential spaces, Mohammad Khaliliazad, 2016, Supervisor-100%
28. Numerical analysis of heat transfer rate and pressure drop in pulsating flow around circular and elliptical cylinders, Fatemeh Ghanbari, 2016, Supervisor-100%
29. Study of transient thermal performance and recovery of an earth-to-air heat exchanger, Iman Shayegh, 2016, Supervisor-100%
30. Numerical study of heat flow pattern in anisotropic solid materials, Farhad Falakzadeh, 2016, Advisor
31. Study on thermal performance of hydronic floor heating systems using hybrid ground source solar heat pump, Hossein Taghvaei, 2014, Supervisor-100%
32. Modeling of fuel preheating effect on performance and emission of a DI diesel engine fueled with biofuels, Kazem Shabanizad, 2014, Supervisor-100%
33. A numerical simulation of blood flow in real model of aneurysm in cerebral arteries, Maryam Kaviani, 2014, Advisor
34. Analysis, modeling, and improvement of non-uniform thermal comfort conditions in a hospital operating room, Mehdi Saeidi Abooeshaghi, 2013, Supervisor-100%
35. Modeling the effects of indoor thermal environmental conditions on hemodynamics of artificial heart valves, Babak Afra, 2013, Supervisor-100%
36. Study of the effect of heat and mass transfer in clothes on human thermal sensation, Hossein Dolatabadi, 2013, Supervisor-100%
37. Analysis of transient thermal response of building exterior walls under different boundary conditions, Behnam Rosti, 2012, Supervisor-100%
38. Study on thermal performance of hydronic floor heating systems in a carpeted room, Aminollah Moghanloo, 2012, Supervisor-50%
39. Cooling performance evaluation of ultra-fine water mist fire suppression systems in enclosures, Amirhossein Mahdavi, 2012, Supervisor-50%
40. The numerical simulation of the behavior of fluidic excited jets and its performance, Amir Mohebbi, 2012, Supervisor-50%

چاپ کتاب

1. M. Maerefat, A. Omidvar, Thermal Comfort; An Approach to Energy Saving in Buildings, Kelid Amoozesh Pub., 2008, (In Persian), ISSN 978-964-2553-64-8

ثبت اختراع

1. Mohammad Abbaspour (50%), Amir Omidvar (50%), Radiant Anti-Frostbiting System for Agricultural Plants, Patent Number:72856, 2011

دروس تدریس شده

MSc and PhD program:

1. Advanced Engineering Mathematics
2. Computational Fluid Dynamics (CFD)
3. Turbulent Flows
4. Boundary Layer Theory
5. Advanced Thermodynamics
6. Heat Transfer in Multiphase Flows
7. Heating, Cooling, and Humidity Control
8. Research Methodology

BSc program:

1. Thermodynamics
2. Manufacturing Processes
3. HVAC System Design